davide@example.com

Davide Ferraris

Mechanical and robotics engineerTurin

I design the machines that build and test other machines: robot cells, grippers and test rigs for automotive and food suppliers in Piedmont. I take a project from the requirement to a signed-off machine on the factory floor.

Chartered engineer
Order of Engineers, Turin
Focus
Robot cells, end effectors, test rigs
Tools
SolidWorks, Ansys, MATLAB, ROS 2
Experience
14 years
Languages
Italian, English, German

Work

5 projects, open a title to see it

  1. Spot-welding cell retrofit

    2025, Turin
    Welding cell with two robots and a car body fixture
    Quick-change fixture, openSimulation of robot reach envelopesCell layout before and after

    Asked: Add a second car body variant to a 2009 welding cell without stopping the line for more than one weekend.

    How: Laser-scanned the cell, rebuilt it in simulation and moved two robots 400 mm to reach the new weld points. A quick-change fixture swaps variants in under 90 seconds.

    Result: Installed over one weekend. Cycle time 58 s, down from 64 s, and 212 weld points per body with no change to the floor plan.

    Client: Tier 1 body supplier. Role: Lead mechanical engineer. Team: 3 engineers, 2 technicians.

  2. Gripper for soft fruit

    2024, Cuneo
    Four-finger silicone gripper holding a peach
    Finger moulds and cast partsGripper over a fruit tray

    Asked: Pick peaches from a conveyor into trays at 40 picks a minute without bruising them.

    How: Four silicone fingers on a vacuum-assisted palm, sized from 300 scanned fruits. Grip force is set by air pressure, closed-loop at 1 kHz.

    Result: Bruise rate 0.4 % against 3 % for hand packing, at 42 picks a minute. Two lines running since July 2024.

    Client: Fruit cooperative. Role: Design and testing. Partner: University lab, soft robotics.

  3. Gearbox end-of-line test rig

    2023, Modena
    Test rig with a gearbox clamped between two servo motors
    Accelerometer mounting points

    Asked: Test every gearbox for noise and backlash before it ships, in under three minutes.

    How: Two servo motors load the input and output shafts while accelerometers record the run-up. Pass and fail limits came from 600 gearboxes measured in the first month.

    Result: 2 min 40 s per unit. Warranty returns for noise fell by two thirds in the first year.

    Client: Driveline manufacturer. Role: Mechanical design, test method.

  4. Hub motor cooling jacket

    2022, Turin
    Cut-away of the hub motor showing the spiral coolant channel
    Dynamometer test set-up

    Asked: Keep a wheel hub motor under 140 °C through a 20-minute hill climb.

    How: Thermal model in Ansys, then three printed jacket designs tested on a dynamometer. The winner routes coolant through a spiral channel cast into the stator housing.

    Result: Peak winding temperature 128 °C at full load. Adds 0.6 kg per wheel.

    Client: Electric vehicle start-up. Role: Thermal and mechanical design.

  5. Passive shoulder exoskeleton

    2021, Milan
    Shoulder exoskeleton worn over a work jacket

    Asked: Reduce shoulder load for line workers who fit parts overhead all shift.

    How: A spring and cam mechanism that supports the arm only above 70 degrees. Tested with 12 workers over four weeks.

    Result: Shoulder muscle activity down 35 % in overhead tasks. Weighs 2.1 kg.

    Partner: Politecnico research group. Role: Mechanism design.

About

I studied mechanical engineering at Politecnico di Torino and spent eight years at a robotics integrator, first on line design and then leading cell projects.

Since 2019 I work independently. I like problems with a hard number at the end: a cycle time, a temperature, a reject rate.

CV

Experience

  • 2019 to nowIndependent engineer
    Robot cells, end effectors and test rigs
  • 2011 to 2019Robotics integrator, Turin
    Project lead, automotive welding and assembly cells
  • 2010 to 2011Machine builder, Ivrea
    Design engineer, packaging machines

Education

  • 2010Politecnico di Torino
    MSc Mechanical Engineering
  • 2009TU Munich
    Exchange semester, robotics