Davide Ferraris

Mechanical and robotics engineerTurin

I design the machines that build and test other machines: robot cells, grippers and test rigs for automotive and food suppliers in Piedmont. I take a project from the requirement to a signed-off machine on the factory floor.

Chartered engineer
Order of Engineers, Turin
Focus
Robot cells, end effectors, test rigs
Tools
SolidWorks, Ansys, MATLAB, ROS 2
Experience
14 years
Languages
Italian, English, German

Projects

  1. 1Spot-welding cell retrofitTurin2025
  2. 2Gripper for soft fruitCuneo2024
  3. 3Gearbox end-of-line test rigModena2023
  4. 4Hub motor cooling jacketTurin2022
  5. 5Passive shoulder exoskeletonMilan2021
Welding cell with two robots and a car body fixture
Project

Spot-welding cell retrofit

Year2025
PlaceTurin
Sheet1 of 5
Client
Tier 1 body supplier
Role
Lead mechanical engineer
Team
3 engineers, 2 technicians

Asked

Add a second car body variant to a 2009 welding cell without stopping the line for more than one weekend.

How

Laser-scanned the cell, rebuilt it in simulation and moved two robots 400 mm to reach the new weld points. A quick-change fixture swaps variants in under 90 seconds.

Result

Installed over one weekend. Cycle time 58 s, down from 64 s, and 212 weld points per body with no change to the floor plan.

Quick-change fixture, open
Fig. 1.1 Quick-change fixture, open
Simulation of robot reach envelopes
Fig. 1.2 Simulation of robot reach envelopes
Cell layout before and after
Fig. 1.3 Cell layout before and after
Four-finger silicone gripper holding a peach
Project

Gripper for soft fruit

Year2024
PlaceCuneo
Sheet2 of 5
Client
Fruit cooperative
Role
Design and testing
Partner
University lab, soft robotics

Asked

Pick peaches from a conveyor into trays at 40 picks a minute without bruising them.

How

Four silicone fingers on a vacuum-assisted palm, sized from 300 scanned fruits. Grip force is set by air pressure, closed-loop at 1 kHz.

Result

Bruise rate 0.4 % against 3 % for hand packing, at 42 picks a minute. Two lines running since July 2024.

Finger moulds and cast parts
Fig. 2.1 Finger moulds and cast parts
Gripper over a fruit tray
Fig. 2.2 Gripper over a fruit tray
Test rig with a gearbox clamped between two servo motors
Project

Gearbox end-of-line test rig

Year2023
PlaceModena
Sheet3 of 5
Client
Driveline manufacturer
Role
Mechanical design, test method

Asked

Test every gearbox for noise and backlash before it ships, in under three minutes.

How

Two servo motors load the input and output shafts while accelerometers record the run-up. Pass and fail limits came from 600 gearboxes measured in the first month.

Result

2 min 40 s per unit. Warranty returns for noise fell by two thirds in the first year.

Accelerometer mounting points
Fig. 3.1 Accelerometer mounting points
Cut-away of the hub motor showing the spiral coolant channel
Project

Hub motor cooling jacket

Year2022
PlaceTurin
Sheet4 of 5
Client
Electric vehicle start-up
Role
Thermal and mechanical design

Asked

Keep a wheel hub motor under 140 °C through a 20-minute hill climb.

How

Thermal model in Ansys, then three printed jacket designs tested on a dynamometer. The winner routes coolant through a spiral channel cast into the stator housing.

Result

Peak winding temperature 128 °C at full load. Adds 0.6 kg per wheel.

Dynamometer test set-up
Fig. 4.1 Dynamometer test set-up
Shoulder exoskeleton worn over a work jacket
Project

Passive shoulder exoskeleton

Year2021
PlaceMilan
Sheet5 of 5
Partner
Politecnico research group
Role
Mechanism design

Asked

Reduce shoulder load for line workers who fit parts overhead all shift.

How

A spring and cam mechanism that supports the arm only above 70 degrees. Tested with 12 workers over four weeks.

Result

Shoulder muscle activity down 35 % in overhead tasks. Weighs 2.1 kg.

About

I studied mechanical engineering at Politecnico di Torino and spent eight years at a robotics integrator, first on line design and then leading cell projects.

Since 2019 I work independently. I like problems with a hard number at the end: a cycle time, a temperature, a reject rate.

CV

Experience

  • 2019 to nowIndependent engineerRobot cells, end effectors and test rigs
  • 2011 to 2019Robotics integrator, TurinProject lead, automotive welding and assembly cells
  • 2010 to 2011Machine builder, IvreaDesign engineer, packaging machines

Education

  • 2010Politecnico di TorinoMSc Mechanical Engineering
  • 2009TU MunichExchange semester, robotics

Contact